Short answer: loss of pay (LOP) is the part of a month's salary not paid for days an employee was absent without paid leave to cover them. The usual calculation is LOP deduction = (monthly salary that is subject to LOP ÷ divisor) × LOP days, where the divisor is the number of days your policy uses for a month (calendar days, a fixed 30, or working days). Under the Code on Wages, 2019, a deduction for absence cannot be a larger share of the wages than the absence is of the total period the employee was required to work in that wage period.[1] Most payroll mistakes happen before this formula is applied: in attendance that was never closed, leave that was never approved, or a divisor nobody wrote down.
This guide walks through the flow from the attendance register to the payslip, with worked examples and a month-end checklist. It explains the general method; it is not legal advice for any particular state or establishment.
Why LOP errors start in attendance, not in payroll
Payroll can only be as right as the inputs it receives. A typical month has three kinds of days for each employee:
- Present days (including permitted work from home or on-duty days).
- Paid absence — approved leave that has balance, paid holidays and weekly offs.
- Unpaid absence — absence with no approved leave or no balance left. These become LOP days.
If an absence sits in the register without a leave application, someone has to decide at month-end whether it is leave or LOP. If that decision is made in a spreadsheet the day before salaries go out, it is easy to get wrong and hard to explain later. The fix is a fixed sequence and a cut-off date.
The legal anchor: deductions for absence
Key provisions of the four labour codes, including the Code on Wages, 2019, took effect on 21 November 2025.[2] The Code lists deductions for absence from duty among the authorised deductions and sets the proportion rule described above.[1] It also treats an employee who is present but refuses to work (for example during a stay-in strike or without reasonable cause) as absent for this purpose.[1]
Three practical consequences:
- The deduction must be proportionate. You cannot cut a full week's pay for a single missed day.
- Your divisor matters, because it decides the value of one day. Write it into the appointment letter or HR policy and use it consistently.
- States also make rules under the labour codes, and rules were still being finalised when the codes commenced.[2] Check the position for your state and establishment with your adviser before you change a policy.
Step by step: from attendance to the payslip
Step 1: Fix the attendance period and cut-off
Decide whether payroll uses the calendar month (1st to last day) or a cut-off (for example 26th of last month to 25th of this month). With a cut-off, absences after the cut-off are adjusted in the next month's payroll as arrears or recoveries. Either works; switching between them mid-year causes double counts.
Step 2: Close the attendance register
Before payroll runs, every day for every employee should have a status: present, half-day, approved leave, holiday, weekly off or absent. Chase missing punches and regularisation requests before the cut-off, not after.
Step 3: Apply leave balances to absences
For each absent day, check the leave policy:
- Was a leave application submitted and approved? Mark it as paid leave and reduce the balance.
- Does the policy allow absences to be adjusted against available leave automatically? If so, apply it and tell the employee.
- No application, no balance, or the policy does not allow adjustment? The day is LOP.
Step 4: Decide on weekly offs and holidays between absences
Some policies treat a weekly off or holiday that falls between two unpaid days as unpaid too (often called a sandwich rule); others never do. This is a policy choice that must be written down and applied the same way to everyone. Whatever your policy, the overall deduction still has to respect the proportion rule.[1]
Step 5: Count LOP days and payable days
Payable days = days in the pay period − LOP days (for a calendar-day divisor). Count half-day absences as 0.5. Keep the LOP count visible on the payslip so the employee can check it.
Step 6: Choose which pay components LOP applies to
Most organisations apply LOP to fixed monthly components (basic, allowances) and not to reimbursements against bills. Variable pay such as incentives follows its own rules. Decide this once in the salary structure.
Step 7: Calculate, then let statutory deductions follow the earned salary
Run the LOP formula on the affected components to get the month's earned gross. Statutory items such as PF, ESI, professional tax and TDS are then worked out under their own rules; confirm with your payroll adviser how each treats a month with LOP, and do not hard-code a full-month figure.
Step 8: Publish the payslip and keep the trail
The payslip should show days in the period, paid days, LOP days and the LOP amount. Keep the attendance record, leave approvals and the payroll run together so a question in three months can be answered from records, not memory.
Worked examples
All figures are illustrative. Monthly salary subject to LOP: ₹30,000.
| Scenario | Divisor | Value of one day | LOP days | LOP deduction | Earned for the month |
|---|---|---|---|---|---|
| 30-day month, calendar-day divisor | 30 | ₹1,000.00 | 2 | ₹2,000.00 | ₹28,000.00 |
| 31-day month, calendar-day divisor | 31 | ₹967.74 | 2 | ₹1,935.48 | ₹28,064.52 |
| Fixed 30-day divisor every month | 30 | ₹1,000.00 | 2 | ₹2,000.00 | ₹28,000.00 |
| Working-day divisor (26 working days) | 26 | ₹1,153.85 | 2 | ₹2,307.69 | ₹27,692.31 |
| Half-day absence, calendar-day divisor | 30 | ₹1,000.00 | 0.5 | ₹500.00 | ₹29,500.00 |
Two things to notice. First, the same two days off cost a different amount depending on the divisor, which is why the divisor must be in writing. Second, in the working-day row the deduction is exactly 2/26 of salary, which matches the proportion of required working days missed. Round only at the final amount, not at the daily rate, so totals reconcile.
Mid-month joiners and leavers
For someone who joins on the 11th of a 30-day month, pay is usually prorated for the days from joining: 20 days × ₹1,000 = ₹20,000 on a calendar-day divisor, before any LOP in those 20 days. Use the same divisor for joining, leaving and LOP so the rules do not contradict each other.
LOP reversals
If an absence was marked LOP and the leave approval arrives after payroll closed, do not edit the closed payslip. Pay the amount back as an arrear in the next run, with a note referring to the original month.
Month-end payroll checklist
- ☐ Attendance period and cut-off date confirmed for this run
- ☐ Every employee-day has a status; missing punches resolved
- ☐ Pending leave applications approved or rejected before cut-off
- ☐ Leave balances applied to absences as the policy allows
- ☐ Weekly-off and holiday treatment applied per written policy
- ☐ LOP days and payable days counted (half-days as 0.5)
- ☐ LOP applied only to components the salary structure lists
- ☐ Divisor the same as in policy and appointment letters
- ☐ Joiners, leavers and last month's reversals included
- ☐ Statutory deductions run on the earned salary, under their own rules
- ☐ Payslips show paid days, LOP days and LOP amount
- ☐ Attendance, approvals and payroll run archived together
Where software helps
The calculation itself is simple. The hard part is keeping attendance, leave and payroll consistent when they live in three different places. In Woxox HRMS, employee records, attendance, leave and payroll (with income-tax and professional tax slabs) are on the same system, so the month's attendance and leave are already where payroll runs. Teams that also keep their books in Woxox Finance work from one database rather than exporting between tools.
FAQs
What is LOP in salary? Loss of pay is the salary not paid for days an employee was absent without paid leave to cover the absence. It appears on the payslip as LOP days and an LOP amount.
How is LOP calculated? Divide the monthly salary subject to LOP by the divisor your policy uses (calendar days in the month, a fixed 30, or working days), then multiply by the number of LOP days. The deduction must stay within the proportion of absence to the required working period.[1]
Should we use 30 days, calendar days or working days? Any of them can work if it is written into your policy, applied consistently and stays within the legal proportion rule. Working-day divisors give a higher daily value; calendar-day divisors vary slightly month to month. Confirm the choice for your state and establishment with your adviser.
Are weekly offs counted as LOP? Only if your written policy says so, for example under a sandwich rule for offs that fall between unpaid days. Many organisations do not do this. Apply whichever rule you choose the same way to everyone.
What happens if leave is approved after payroll is processed? Leave the closed payslip as it is and pay back the LOP amount as an arrear in the next payroll, referring to the original month.
Can an employer deduct more than the days absent? Generally no: the deduction is capped by the proportion rule. The Code on Wages has a specific proviso for ten or more employees absenting together without notice and without reasonable cause, which can allow up to eight days' wages in lieu of notice, subject to rules.[1] Take advice before relying on it.
Make the month-end routine boring
If your attendance, leave approvals and payroll still meet for the first time in a spreadsheet each month, it is worth seeing them on one record. See it on your workflows: book a Woxox demo.
By WOXOX Editorial Team
Sources
- The Code on Wages, 2019 (Act 29 of 2019), sections 18 and 20 — India Code, Legislative Department, Government of India: https://www.indiacode.nic.in/bitstream/123456789/15793/1/aA2019-29.pdf
- BDO India, "Implementation of Labour Codes – key provisions notified effective 21 November 2025" (alert, 22 Nov 2025): https://www.bdo.in/en-gb/insights/alerts-updates/alert-implementation-of-labour-codes-key-provisions-notified-effective-21-november-2025